True Wireless Stereo (TWS) lets you link two HUMM GLO speakers together to play audio in stereo. This article explains how to set up TWS, connect your phone, and release the pairing.
Requirements
- Two HUMM GLO speakers.
- Both speakers must be powered on.
Setting up TWS
- Turn on both GLO speakers.
- Long-press the Bluetooth button on the first speaker and hold it until the indicator responds.
- Long-press the Bluetooth button on the second speaker in the same way.
- Wait a moment for the two speakers to sync with each other.
- On your phone, open Bluetooth settings and connect to one of the two GLO speakers. Audio will play through both.
Using TWS
Once TWS is active, controls work across both speakers automatically. Volume, play, pause, and track skip all apply to both devices at the same time.
If one speaker is powered off while in TWS mode, both speakers will power off.
When you turn both speakers back on after a TWS session, they will automatically re-enter TWS mode without requiring you to repeat the setup.
Releasing TWS
- On either speaker, hold the Bluetooth button for approximately 3 seconds.
- The speakers will separate and return to independent operation.